商品详情
1、 专用液压伸缩式履带底盘，大直径回转支承，整机稳定性更高；
It adopts dedicated hydraulic retractable crawler chassis and large diameter slewing bearing and has high stability;
2、 整机设计满足CE指令要求，安全性能有保证，满足欧Ⅲ排放标准；
The design of the machine complies with CE standard to ensure it’safty and Euro III emission standard.
3、 动力头拥有普通模式和入岩模式，分别针对土层和岩层作业，提高了施工效率；
The rotary drive can switch between Normal mode and Rock mode which are applicable for soil and rock excavation respectively，improve the efficiency.
4、 前置单排绳主卷扬结构，钢丝绳寿命大大延长，使用成本更低；
It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost.
5、 多种钻杆钻具配置可供选择，可满足大孔深桩硬地层施工，最大钻深102米；
Several forms of Drilling rods are available for construction of big holes and deep piles in hard formation，the max. depth is 102 meters .
6、 可选多功能配置：支腿油缸，套管驱动，扩展性好；
Several extended functions are available for selection, such as foot bracing oil cylinder, sleeve-driven.
7、 标配集中润滑系统，维护保养更便捷，提高工作可靠性。
It is equipped with a centralized lubrication system as standard configuration; maintenance is easy.
| 发动机 | 型号 | ? | CUMMINS QSM11-C400 |
| 额定功率 | kW | 298 | |
| 动力头 | 最大输出扭矩 | kN·m | 360 |
| 转速 | r/min | 5-20 | |
| 最大钻孔直径 | mm | Φ2500 | |
| 最大钻孔深度 | m | 102 | |
| 加压卷扬 | 最大加压力 | kN | 240 |
| 最大提升力 | kN | 250 | |
| 最大行程 | m | 6 | |
| 主卷扬 | 最大提升力 | kN | 280 |
| 最大卷扬速度 | m/min | 72 | |
| 副卷扬 | 最大提升力 | kN | 100 |
| 最大卷扬速度 | m/min | 65 | |
| 钻桅倾度侧向 / 前倾 / 后倾 | ± 3°/ 5°/ 15° | ||
| 底 盘 | 最大行走速度 | km/h | 1.5 |
| 最大爬坡度 | % | 35 | |
| 最小离地点间隙 | mm | 450 | |
| 履带板宽度 | mm | 800 | |
| 履带最大总宽 | mm | 4800 | |
| 液压系统 | Mpa | 35 | |
| 工作压力 | |||
| 整机工作质量 | t | 92 | |
| 外形尺寸 | 工作状态 | mm | 11000×4800×24586 |
| 运输状态 | mm | 17380×3500×3810 | |
